And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:14.689
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
38.066
And
I accept adding "cowsay" to Additional Software
4.529
And
Additional Software is correctly configured for package "cowsay"
1.069
And
I shutdown Tails and wait for the computer to power off
9.906
And
I start Tails from USB drive "__internal" with network unplugged
1:20.616
And
I enable persistence
17.382
And
I configure APT to prefer an old version of cowsay
0.406
And
I disable the tails-virt-notify-user.service user unit
0.159
And
I log in to a new session
48.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.591
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.100
And
available upgrades have been checked
0.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.755
And
I can open the Additional Software configuration window from the notification
3.319
And
I shutdown Tails and wait for the computer to power off
15.363
And
I start Tails from USB drive "__internal" with network unplugged
1:17.896
And
I enable persistence
16.362
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
49.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.638
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.840
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.212