And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:45.950
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.217
And
I accept adding "cowsay" to Additional Software
5.656
And
Additional Software is correctly configured for package "cowsay"
1.094
And
I shutdown Tails and wait for the computer to power off
7.624
And
I start Tails from USB drive "__internal" with network unplugged
1:10.490
And
I enable persistence
16.369
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
40.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.686
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.067
And
available upgrades have been checked
1.228
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.053
And
I can open the Additional Software configuration window from the notification
2.955
And
I shutdown Tails and wait for the computer to power off
2:3.375
And
I start Tails from USB drive "__internal" with network unplugged
1:11.353
And
I enable persistence
18.478
And
I configure APT to prefer an old version of cowsay
0.262
And
I log in to a new session
49.169
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.960
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.168
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108