And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.671
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.532
And
I accept adding "cowsay" to Additional Software
7.064
And
Additional Software is correctly configured for package "cowsay"
0.896
And
I shutdown Tails and wait for the computer to power off
6.381
And
I start Tails from USB drive "__internal" with network unplugged
1:1.339
And
I enable persistence
11.950
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
41.056
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.074
And
available upgrades have been checked
2.507
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.507
And
I can open the Additional Software configuration window from the notification
2.849
And
I shutdown Tails and wait for the computer to power off
13.030
And
I start Tails from USB drive "__internal" with network unplugged
1:3.394
And
I enable persistence
11.329
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
37.259
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.151
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.156