And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.596
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.656
And
I accept adding "cowsay" to Additional Software
5.472
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
7.748
And
I start Tails from USB drive "__internal" with network unplugged
42.724
And
I enable persistence
8.092
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
12.339
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.794
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.072
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.802
And
I can open the Additional Software configuration window from the notification
2.910
And
I shutdown Tails and wait for the computer to power off
17.631
And
I start Tails from USB drive "__internal" with network unplugged
42.281
And
I enable persistence
7.702
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.302
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.816
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.082
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073