And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:38.770
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.367
And
I accept adding "cowsay" to Additional Software
6.950
And
Additional Software is correctly configured for package "cowsay"
0.858
And
I shutdown Tails and wait for the computer to power off
5.008
And
I start Tails from USB drive "__internal" with network unplugged
46.040
And
I enable persistence
7.805
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
14.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.124
And
the network is plugged
0.155
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.908
And
I can open the Additional Software configuration window from the notification
2.866
And
I shutdown Tails and wait for the computer to power off
18.312
And
I start Tails from USB drive "__internal" with network unplugged
47.849
And
I enable persistence
8.785
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.654
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.885
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111