And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.018
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.965
And
I accept adding "cowsay" to Additional Software
5.496
And
Additional Software is correctly configured for package "cowsay"
0.659
And
I shutdown Tails and wait for the computer to power off
7.682
And
I start Tails from USB drive "__internal" with network unplugged
44.496
And
I enable persistence
7.982
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
11.897
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.052
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.309
And
I can open the Additional Software configuration window from the notification
2.749
And
I shutdown Tails and wait for the computer to power off
23.374
And
I start Tails from USB drive "__internal" with network unplugged
42.037
And
I enable persistence
9.177
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
12.444
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.359
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.194
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082