And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:31.377
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.642
And
I accept adding "cowsay" to Additional Software
5.494
And
Additional Software is correctly configured for package "cowsay"
0.829
And
I shutdown Tails and wait for the computer to power off
7.751
And
I start Tails from USB drive "__internal" with network unplugged
41.454
And
I enable persistence
7.753
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
12.692
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.927
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.498
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.436
And
I can open the Additional Software configuration window from the notification
2.981
And
I shutdown Tails and wait for the computer to power off
18.959
And
I start Tails from USB drive "__internal" with network unplugged
42.218
And
I enable persistence
7.683
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.773
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.459
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068