And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.958
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.947
And
I accept adding "cowsay" to Additional Software
7.646
And
Additional Software is correctly configured for package "cowsay"
0.770
And
I shutdown Tails and wait for the computer to power off
7.597
And
I start Tails from USB drive "__internal" with network unplugged
42.054
And
I enable persistence
8.992
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
13.394
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.105
And
the network is plugged
0.060
And
available upgrades have been checked
1.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.075
And
I can open the Additional Software configuration window from the notification
2.870
And
I shutdown Tails and wait for the computer to power off
18.262
And
I start Tails from USB drive "__internal" with network unplugged
41.488
And
I enable persistence
9.038
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
12.841
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.410
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.136
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063