And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.054
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.946
And
I accept adding "cowsay" to Additional Software
5.853
And
Additional Software is correctly configured for package "cowsay"
0.786
And
I shutdown Tails and wait for the computer to power off
7.555
And
I start Tails from USB drive "__internal" with network unplugged
42.824
And
I enable persistence
9.111
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
12.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.096
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.980
And
I can open the Additional Software configuration window from the notification
2.775
And
I shutdown Tails and wait for the computer to power off
17.282
And
I start Tails from USB drive "__internal" with network unplugged
41.612
And
I enable persistence
7.693
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.827
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075