And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.076
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.683
And
I accept adding "cowsay" to Additional Software
7.883
And
Additional Software is correctly configured for package "cowsay"
0.787
And
I shutdown Tails and wait for the computer to power off
4.767
And
I start Tails from USB drive "__internal" with network unplugged
44.155
And
I enable persistence
9.511
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
14.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.848
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.099
And
the network is plugged
0.088
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.514
And
I can open the Additional Software configuration window from the notification
3.016
And
I shutdown Tails and wait for the computer to power off
18.957
And
I start Tails from USB drive "__internal" with network unplugged
44.694
And
I enable persistence
9.338
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.265
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.482
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073