And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.989
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.897
And
I accept adding "cowsay" to Additional Software
5.751
And
Additional Software is correctly configured for package "cowsay"
0.798
And
I shutdown Tails and wait for the computer to power off
7.876
And
I start Tails from USB drive "__internal" with network unplugged
41.602
And
I enable persistence
9.390
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
13.040
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.501
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.053
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.300
And
I can open the Additional Software configuration window from the notification
2.800
And
I shutdown Tails and wait for the computer to power off
13.881
And
I start Tails from USB drive "__internal" with network unplugged
42.328
And
I enable persistence
7.745
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.042
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.858
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.251
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124