And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.678
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.680
And
I accept adding "cowsay" to Additional Software
3.705
And
Additional Software is correctly configured for package "cowsay"
0.585
And
I shutdown Tails and wait for the computer to power off
7.836
And
I start Tails from USB drive "__internal" with network unplugged
36.480
And
I enable persistence
5.839
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
9.601
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.705
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.014
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.517
And
I can open the Additional Software configuration window from the notification
2.503
And
I shutdown Tails and wait for the computer to power off
22.574
And
I start Tails from USB drive "__internal" with network unplugged
34.976
And
I enable persistence
5.658
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.194
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.633
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.141
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062