And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:46.240
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.367
And
I accept adding "cowsay" to Additional Software
3.661
And
Additional Software is correctly configured for package "cowsay"
0.653
And
I shutdown Tails and wait for the computer to power off
8.058
And
I start Tails from USB drive "__internal" with network unplugged
36.970
And
I enable persistence
6.721
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.774
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.087
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.039
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.253
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
17.456
And
I start Tails from USB drive "__internal" with network unplugged
36.935
And
I enable persistence
5.494
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.347
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076