And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.702
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.383
And
I accept adding "cowsay" to Additional Software
4.968
And
Additional Software is correctly configured for package "cowsay"
0.708
And
I shutdown Tails and wait for the computer to power off
7.925
And
I start Tails from USB drive "__internal" with network unplugged
37.249
And
I enable persistence
5.525
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
11.751
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.737
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.027
And
available upgrades have been checked
2.155
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.014
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.593
And
I start Tails from USB drive "__internal" with network unplugged
37.565
And
I enable persistence
5.813
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.267
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077