And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.800
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.908
And
I accept adding "cowsay" to Additional Software
4.860
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
8.170
And
I start Tails from USB drive "__internal" with network unplugged
38.590
And
I enable persistence
7.096
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
11.198
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.308
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.036
And
available upgrades have been checked
2.190
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.027
And
I can open the Additional Software configuration window from the notification
2.613
And
I shutdown Tails and wait for the computer to power off
22.994
And
I start Tails from USB drive "__internal" with network unplugged
38.905
And
I enable persistence
6.963
And
I configure APT to prefer an old version of cowsay
0.017
And
I log in to a new session
10.677
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.679
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.139
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080