And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.874
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.556
And
I accept adding "cowsay" to Additional Software
5.163
And
Additional Software is correctly configured for package "cowsay"
0.563
And
I shutdown Tails and wait for the computer to power off
4.125
And
I start Tails from USB drive "__internal" with network unplugged
37.765
And
I enable persistence
5.954
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
9.975
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.762
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.017
And
available upgrades have been checked
0.034
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.732
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
17.440
And
I start Tails from USB drive "__internal" with network unplugged
37.469
And
I enable persistence
6.333
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052