And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.533
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.245
And
I accept adding "cowsay" to Additional Software
3.666
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
7.879
And
I start Tails from USB drive "__internal" with network unplugged
34.624
And
I enable persistence
5.426
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
9.557
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.014
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.000
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
18.487
And
I start Tails from USB drive "__internal" with network unplugged
34.334
And
I enable persistence
6.151
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.403
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.116
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065