And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:34.531
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.242
And
I accept adding "cowsay" to Additional Software
5.872
And
Additional Software is correctly configured for package "cowsay"
0.674
And
I shutdown Tails and wait for the computer to power off
3.114
And
I start Tails from USB drive "__internal" with network unplugged
42.835
And
I enable persistence
7.565
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.122
And
I log in to a new session
10.840
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.061
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.677
And
I can open the Additional Software configuration window from the notification
2.996
And
I shutdown Tails and wait for the computer to power off
18.327
And
I start Tails from USB drive "__internal" with network unplugged
43.485
And
I enable persistence
8.192
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075