And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.539
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.958
And
I accept adding "cowsay" to Additional Software
5.070
And
Additional Software is correctly configured for package "cowsay"
0.608
And
I shutdown Tails and wait for the computer to power off
7.959
And
I start Tails from USB drive "__internal" with network unplugged
37.652
And
I enable persistence
6.776
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.339
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.311
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.017
And
available upgrades have been checked
2.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.489
And
I can open the Additional Software configuration window from the notification
2.602
And
I shutdown Tails and wait for the computer to power off
17.340
And
I start Tails from USB drive "__internal" with network unplugged
37.703
And
I enable persistence
7.714
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.157
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.690
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.133
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062