And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.985
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.536
And
I accept adding "cowsay" to Additional Software
4.910
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
4.167
And
I start Tails from USB drive "__internal" with network unplugged
37.045
And
I enable persistence
7.186
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.327
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.019
And
available upgrades have been checked
2.331
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.080
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
17.706
And
I start Tails from USB drive "__internal" with network unplugged
37.371
And
I enable persistence
7.012
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.430
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.320
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.134
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059