And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:46.942
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.841
And
I accept adding "cowsay" to Additional Software
4.837
And
Additional Software is correctly configured for package "cowsay"
0.584
And
I shutdown Tails and wait for the computer to power off
8.006
And
I start Tails from USB drive "__internal" with network unplugged
37.740
And
I enable persistence
6.706
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.014
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.499
And
I can open the Additional Software configuration window from the notification
2.579
And
I shutdown Tails and wait for the computer to power off
17.342
And
I start Tails from USB drive "__internal" with network unplugged
37.382
And
I enable persistence
7.574
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.088
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.274
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073