And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.382
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.578
And
I accept adding "cowsay" to Additional Software
3.726
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
7.884
And
I start Tails from USB drive "__internal" with network unplugged
36.184
And
I enable persistence
5.494
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.055
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.630
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.018
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.526
And
I can open the Additional Software configuration window from the notification
2.504
And
I shutdown Tails and wait for the computer to power off
13.143
And
I start Tails from USB drive "__internal" with network unplugged
36.307
And
I enable persistence
5.924
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.988
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.297
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065