And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.533
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.207
And
I accept adding "cowsay" to Additional Software
4.024
And
Additional Software is correctly configured for package "cowsay"
0.728
And
I shutdown Tails and wait for the computer to power off
7.369
And
I start Tails from USB drive "__internal" with network unplugged
41.131
And
I enable persistence
7.412
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
10.333
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.380
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.061
And
available upgrades have been checked
0.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.685
And
I can open the Additional Software configuration window from the notification
2.754
And
I shutdown Tails and wait for the computer to power off
13.340
And
I start Tails from USB drive "__internal" with network unplugged
40.857
And
I enable persistence
7.804
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
10.298
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.144
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076