And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.437
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.392
And
I accept adding "cowsay" to Additional Software
5.528
And
Additional Software is correctly configured for package "cowsay"
0.763
And
I shutdown Tails and wait for the computer to power off
8.491
And
I start Tails from USB drive "__internal" with network unplugged
46.939
And
I enable persistence
10.020
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.139
And
I log in to a new session
14.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.050
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.008
And
I can open the Additional Software configuration window from the notification
2.819
And
I shutdown Tails and wait for the computer to power off
18.295
And
I start Tails from USB drive "__internal" with network unplugged
48.565
And
I enable persistence
10.475
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
16.742
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.400
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082