And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.275
And
I configure APT to prefer an old version of cowsay
0.055
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.251
And
I accept adding "cowsay" to Additional Software
4.888
And
Additional Software is correctly configured for package "cowsay"
0.759
And
I shutdown Tails and wait for the computer to power off
8.145
And
I start Tails from USB drive "__internal" with network unplugged
39.408
And
I enable persistence
7.460
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
10.252
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.516
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.017
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.520
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
18.279
And
I start Tails from USB drive "__internal" with network unplugged
38.851
And
I enable persistence
6.777
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.335
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.127