And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.383
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.413
And
I accept adding "cowsay" to Additional Software
3.716
And
Additional Software is correctly configured for package "cowsay"
0.616
And
I shutdown Tails and wait for the computer to power off
7.861
And
I start Tails from USB drive "__internal" with network unplugged
34.229
And
I enable persistence
5.441
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.358
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.013
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.538
And
I can open the Additional Software configuration window from the notification
2.486
And
I shutdown Tails and wait for the computer to power off
13.046
And
I start Tails from USB drive "__internal" with network unplugged
35.350
And
I enable persistence
6.242
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.005
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.353
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.126
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059