And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.516
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.316
And
I accept adding "cowsay" to Additional Software
3.640
And
Additional Software is correctly configured for package "cowsay"
0.612
And
I shutdown Tails and wait for the computer to power off
7.972
And
I start Tails from USB drive "__internal" with network unplugged
34.962
And
I enable persistence
5.524
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.606
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.270
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.014
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.969
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
13.064
And
I start Tails from USB drive "__internal" with network unplugged
35.464
And
I enable persistence
5.430
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.991
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061