And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.151
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.034
And
I accept adding "cowsay" to Additional Software
4.720
And
Additional Software is correctly configured for package "cowsay"
0.770
And
I shutdown Tails and wait for the computer to power off
8.095
And
I start Tails from USB drive "__internal" with network unplugged
38.125
And
I enable persistence
7.134
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
9.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.512
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.014
And
available upgrades have been checked
2.256
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.483
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
17.623
And
I start Tails from USB drive "__internal" with network unplugged
37.547
And
I enable persistence
6.777
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
9.523
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.730
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.045
Then
the Additional Software upgrade service has started
0.140
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057