And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.096
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.513
And
I accept adding "cowsay" to Additional Software
5.148
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
8.495
And
I start Tails from USB drive "__internal" with network unplugged
37.326
And
I enable persistence
5.516
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.801
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.016
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.972
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
22.541
And
I start Tails from USB drive "__internal" with network unplugged
38.797
And
I enable persistence
7.399
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
10.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.318
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.132
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058