And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.149
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.134
And
I accept adding "cowsay" to Additional Software
5.384
And
Additional Software is correctly configured for package "cowsay"
0.751
And
I shutdown Tails and wait for the computer to power off
3.023
And
I start Tails from USB drive "__internal" with network unplugged
42.998
And
I enable persistence
8.107
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
12.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.313
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.092
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.543
And
I can open the Additional Software configuration window from the notification
2.747
And
I shutdown Tails and wait for the computer to power off
7.478
And
I start Tails from USB drive "__internal" with network unplugged
42.959
And
I enable persistence
8.242
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
11.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.310
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062