And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.631
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.675
And
I accept adding "cowsay" to Additional Software
3.634
And
Additional Software is correctly configured for package "cowsay"
0.576
And
I shutdown Tails and wait for the computer to power off
7.923
And
I start Tails from USB drive "__internal" with network unplugged
35.205
And
I enable persistence
6.486
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.170
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.355
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.017
And
available upgrades have been checked
2.128
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.517
And
I can open the Additional Software configuration window from the notification
2.610
And
I shutdown Tails and wait for the computer to power off
12.983
And
I start Tails from USB drive "__internal" with network unplugged
34.723
And
I enable persistence
5.410
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.788
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.134
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062