And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.596
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.576
And
I accept adding "cowsay" to Additional Software
3.681
And
Additional Software is correctly configured for package "cowsay"
0.701
And
I shutdown Tails and wait for the computer to power off
8.424
And
I start Tails from USB drive "__internal" with network unplugged
37.650
And
I enable persistence
6.532
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.475
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.823
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.013
And
available upgrades have been checked
2.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.527
And
I can open the Additional Software configuration window from the notification
2.521
And
I shutdown Tails and wait for the computer to power off
22.448
And
I start Tails from USB drive "__internal" with network unplugged
37.758
And
I enable persistence
5.464
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.512
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.340
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091