And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.505
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.905
And
I accept adding "cowsay" to Additional Software
5.607
And
Additional Software is correctly configured for package "cowsay"
0.744
And
I shutdown Tails and wait for the computer to power off
7.745
And
I start Tails from USB drive "__internal" with network unplugged
43.394
And
I enable persistence
7.651
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.143
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.056
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.648
And
I can open the Additional Software configuration window from the notification
2.750
And
I shutdown Tails and wait for the computer to power off
22.514
And
I start Tails from USB drive "__internal" with network unplugged
42.754
And
I enable persistence
7.711
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
11.372
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.177
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091