And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.588
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.336
And
I accept adding "cowsay" to Additional Software
5.135
And
Additional Software is correctly configured for package "cowsay"
0.692
And
I shutdown Tails and wait for the computer to power off
8.439
And
I start Tails from USB drive "__internal" with network unplugged
37.138
And
I enable persistence
5.689
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
11.112
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.315
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.020
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.039
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
4.042
And
I start Tails from USB drive "__internal" with network unplugged
37.142
And
I enable persistence
6.979
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
9.455
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.320
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051