And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.223
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.572
And
I accept adding "cowsay" to Additional Software
3.705
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
7.821
And
I start Tails from USB drive "__internal" with network unplugged
36.553
And
I enable persistence
5.483
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.574
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
2.134
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.475
And
I can open the Additional Software configuration window from the notification
2.504
And
I shutdown Tails and wait for the computer to power off
13.609
And
I start Tails from USB drive "__internal" with network unplugged
35.822
And
I enable persistence
6.363
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.234
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.296
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.139
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057