And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.115
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.171
And
I accept adding "cowsay" to Additional Software
4.982
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
7.350
And
I start Tails from USB drive "__internal" with network unplugged
39.387
And
I enable persistence
6.946
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
12.467
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.715
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
2.237
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.955
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
17.821
And
I start Tails from USB drive "__internal" with network unplugged
38.772
And
I enable persistence
6.760
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.598
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.745
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.043
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083