And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.422
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.333
And
I accept adding "cowsay" to Additional Software
5.571
And
Additional Software is correctly configured for package "cowsay"
0.725
And
I shutdown Tails and wait for the computer to power off
7.655
And
I start Tails from USB drive "__internal" with network unplugged
43.151
And
I enable persistence
8.797
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
13.467
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.107
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.083
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.724
And
I can open the Additional Software configuration window from the notification
2.895
And
I shutdown Tails and wait for the computer to power off
23.224
And
I start Tails from USB drive "__internal" with network unplugged
42.416
And
I enable persistence
8.179
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.277
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.687
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101