And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.467
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.554
And
I accept adding "cowsay" to Additional Software
4.826
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
8.596
And
I start Tails from USB drive "__internal" with network unplugged
38.702
And
I enable persistence
7.465
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.849
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.910
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
I prepare the Additional Software upgrade process to fail
0.091
And
the network is plugged
0.019
And
available upgrades have been checked
1.130
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.409
And
I can open the Additional Software configuration window from the notification
2.651
And
I shutdown Tails and wait for the computer to power off
17.685
And
I start Tails from USB drive "__internal" with network unplugged
39.898
And
I enable persistence
7.022
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
12.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.716
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056