And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.112
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.763
And
I accept adding "cowsay" to Additional Software
5.000
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
7.190
And
I start Tails from USB drive "__internal" with network unplugged
40.176
And
I enable persistence
5.646
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.041
And
available upgrades have been checked
2.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.976
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
12.756
And
I start Tails from USB drive "__internal" with network unplugged
38.437
And
I enable persistence
6.856
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.742
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.495
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.138
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.104