And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:40.435
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.543
And
I accept adding "cowsay" to Additional Software
5.702
And
Additional Software is correctly configured for package "cowsay"
1.456
And
I shutdown Tails and wait for the computer to power off
8.345
And
I start Tails from USB drive "__internal" with network unplugged
47.035
And
I enable persistence
10.875
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.374
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.060
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.174
And
I can open the Additional Software configuration window from the notification
2.688
And
I shutdown Tails and wait for the computer to power off
22.200
And
I start Tails from USB drive "__internal" with network unplugged
45.489
And
I enable persistence
11.050
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
13.435
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.732
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074