And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.461
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.615
And
I accept adding "cowsay" to Additional Software
3.656
And
Additional Software is correctly configured for package "cowsay"
0.644
And
I shutdown Tails and wait for the computer to power off
7.771
And
I start Tails from USB drive "__internal" with network unplugged
35.184
And
I enable persistence
5.354
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.337
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.017
And
available upgrades have been checked
2.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.472
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
13.055
And
I start Tails from USB drive "__internal" with network unplugged
35.555
And
I enable persistence
5.607
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.275
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.109
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061