And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.831
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.432
And
I accept adding "cowsay" to Additional Software
5.455
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
7.730
And
I start Tails from USB drive "__internal" with network unplugged
43.629
And
I enable persistence
8.741
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
13.835
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.859
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.090
And
available upgrades have been checked
0.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.743
And
I can open the Additional Software configuration window from the notification
3.058
And
I shutdown Tails and wait for the computer to power off
2:7.012
And
I start Tails from USB drive "__internal" with network unplugged
43.744
And
I enable persistence
7.944
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.353
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.787
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086