And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.055
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.264
And
I accept adding "cowsay" to Additional Software
6.283
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
8.443
And
I start Tails from USB drive "__internal" with network unplugged
39.117
And
I enable persistence
7.690
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
10.870
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.477
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.018
And
available upgrades have been checked
2.272
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.619
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.984
And
I start Tails from USB drive "__internal" with network unplugged
39.044
And
I enable persistence
6.919
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
12.202
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061