And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.390
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.834
And
I accept adding "cowsay" to Additional Software
5.525
And
Additional Software is correctly configured for package "cowsay"
0.768
And
I shutdown Tails and wait for the computer to power off
9.158
And
I start Tails from USB drive "__internal" with network unplugged
47.172
And
I enable persistence
10.178
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.311
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.342
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.104
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.058
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.009
And
I can open the Additional Software configuration window from the notification
2.866
And
I shutdown Tails and wait for the computer to power off
18.757
And
I start Tails from USB drive "__internal" with network unplugged
1:5.117
And
I enable persistence
18.113
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.212
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.366
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076