And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.835
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.818
And
I accept adding "cowsay" to Additional Software
5.189
And
Additional Software is correctly configured for package "cowsay"
0.744
And
I shutdown Tails and wait for the computer to power off
8.187
And
I start Tails from USB drive "__internal" with network unplugged
37.962
And
I enable persistence
5.744
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.252
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.068
And
available upgrades have been checked
3.195
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.480
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
17.616
And
I start Tails from USB drive "__internal" with network unplugged
38.106
And
I enable persistence
6.891
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.477
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072