And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.292
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.347
And
I accept adding "cowsay" to Additional Software
3.654
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
7.858
And
I start Tails from USB drive "__internal" with network unplugged
35.700
And
I enable persistence
6.577
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.499
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.015
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.399
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
22.191
And
I start Tails from USB drive "__internal" with network unplugged
35.586
And
I enable persistence
6.482
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.842
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.493
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051