And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.841
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.872
And
I accept adding "cowsay" to Additional Software
5.083
And
Additional Software is correctly configured for package "cowsay"
0.790
And
I shutdown Tails and wait for the computer to power off
8.365
And
I start Tails from USB drive "__internal" with network unplugged
40.457
And
I enable persistence
6.757
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.022
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.522
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
17.652
And
I start Tails from USB drive "__internal" with network unplugged
39.138
And
I enable persistence
6.897
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
12.817
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.086
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062