And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.037
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.862
And
I accept adding "cowsay" to Additional Software
5.040
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
4.437
And
I start Tails from USB drive "__internal" with network unplugged
38.719
And
I enable persistence
6.937
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.820
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.014
And
available upgrades have been checked
2.189
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.178
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
17.731
And
I start Tails from USB drive "__internal" with network unplugged
39.078
And
I enable persistence
6.722
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.486
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.041
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073