And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.717
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.794
And
I accept adding "cowsay" to Additional Software
5.326
And
Additional Software is correctly configured for package "cowsay"
0.766
And
I shutdown Tails and wait for the computer to power off
8.132
And
I start Tails from USB drive "__internal" with network unplugged
37.270
And
I enable persistence
6.468
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.044
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.481
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.018
And
available upgrades have been checked
1.125
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.515
And
I can open the Additional Software configuration window from the notification
2.572
And
I shutdown Tails and wait for the computer to power off
17.631
And
I start Tails from USB drive "__internal" with network unplugged
37.465
And
I enable persistence
6.475
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
10.498
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061