And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.138
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.637
And
I accept adding "cowsay" to Additional Software
3.588
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
4.385
And
I start Tails from USB drive "__internal" with network unplugged
35.168
And
I enable persistence
5.612
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.999
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.017
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.475
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
17.146
And
I start Tails from USB drive "__internal" with network unplugged
35.353
And
I enable persistence
5.421
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.101
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079